Advertisement
To set the day and time
You do not have to follow the complete
sequence, if for example you only want to
change the hour, you can follow the
instructions for changing the hour and skip
the rest of the instructions.
DAY
HOUR
MIN
• Press and hold the
announce, "The day is... ", then run through
the days of the week.
• Release the
DAY
current day. The unit will repeat the setting
and announce, "Accepted".
• Press and hold the
will announce "The hour is... ", then run
through the hours.
• Release the
HOUR
the current hour. (The unit will announce,
"PM" after twelve mid-day). The unit will
repeat the setting and announce, "Accepted".
• Press and hold the
The unit will announce, "The minute is... ",
then run through the minutes.
• Release the
button when you reach the
MIN
number of minutes past the current hour.
The unit will repeat the setting and
announce, "Accepted".
button. The unit will
DAY
button when you reach the
button. The unit
HOUR
button when you reach
(minute) button.
MIN
To check the day and time
MIN
DAY
HOUR
• Press and release the
will announce the current time and day.
To listen to the outgoing message
OUTGOING MESSAGE
• Press and release the
button.
To record a new outgoing message
• Press and hold the
button. The unit will announce, "Please speak
after the tone, release the button to end
recording."
• Start your outgoing message after the tone,
speak about 20 cm away from the
microphone which is located next to the
ANSWER ON/OFF
countdown from "30" to "00".
• Continue to hold down the
button until you have finished,
MESSAGE
then release the button.
• The unit will announce, "End of recording,
your outgoing message is..." and will play
back your outgoing message.
button, the unit
DAY
OUTGOING MESSAGE
OUTGOING MESSAGE
button. The display will
OUTGOING
Advertisement
