Advertisement
To call the base-unit from the handset
• Press the
INTERCOM
The base-unit and handset will beep, the
INTERCOM lights on both will flash.
• To answer the INTERCOM call, press the
button on the base-unit.
INTERCOM
• You can now speak using the handset and
the microphone located next to the
ANSWER ON/OFF
• To end the call, press the
button on either the base-unit or the
handset. Both INTERCOM lights will go out.
You will not miss any incoming calls while the
INTERCOM is in use.
If an incoming call is received, the base-unit
will ring normally and can be heard through
the handset. To answer the call press the
button on the handset, the intercom will
TALK
be cut off.
button on the handset.
button on the base-unit.
INTERCOM
To set the PIN code
Your Freestyle 1100 Plus can be accessed
remotely, by using the preset PIN code of
0,0,0. This allows access to the answering
machine from another telephone, see
DAY
HOUR
MIN
CODE
OUTGOING MESSAGE
If you wish to change this code
• Press and hold the
unit announces, "Code setting... zero".
• Press and release the
you reach the number you want for the first
digit of your PIN code.
• Press the
CODE
announce "Accepted" and then "Zero" for the
next digit.
• Press and release the
you reach the number you want for the
second digit of your PIN code.
• Press the
CODE
announce "Accepted" and then "Zero" for the
last digit.
• Press and release the
you reach the number you want for the last
digit of your PIN code.
• Press the
CODE
announce "Accepted" and announce and
display the new PIN code.
button until the
CODE
button until
HOUR
button. The unit will
button until
HOUR
button. The unit will
button until
HOUR
button. The unit will
.
Advertisement
