Table of Contents
Advertisement
80
Base settings
4. Display shows
ENTER NEW PIN
press SAVE. Display shows
new PIN again.
4. Press SAVE. The display shows
5. Press
to return to standby or
back in the menu.
Repeater mode
You can use a repeater to boost the range and reception
of your base. A repeater must be registered with the base
and the repeater function must be set to ON.
The default setting is off.
1. Press
MENU
then scroll
press OK. Scroll
DOWN
2. Press
OK
then
LEFT
3. Press
SAVE
to keep the settings displayed.
4. Press
to return to standby or
back in the menu.
. Enter the new PIN and
CONFIRM NEW PIN
SYSTEM PIN CHANGED
BACK
to go one step
DOWN
to
BASE SETTINGS
to
REPEATER MODE
or
RIGHT
to select
ON
BACK
to go one step
. Enter your
.
and
.
or
OFF
.
Advertisement
Table of Contents
