Rolled Hem - ELNA 6200 Instruction Manual

Rolled Hem

01
D
An easy, professional way to sew hems. The spiral on
the hemmer foot guides the fabric edge to create a rolled
hem. Recommended for fine, sheer fabrics used in bridal
wear.
Trim about 6.5 mm (1/4˝) from corners to reduce bulk.
Make a double 3 mm (1/8˝) fold approximately 8 cm (3˝)
in length.
Align fabric hem edge with the inside of right extension of
foot q. Use this placement on foot as guide. Lower
q
presser foot. Sew 3 or 4 stitches while holding needle
and bobbin threads. Stop sewing.
w
Lower needle into fabric and raise presser foot. Insert
folded portion of fabric into spiral of foot w.
Lower presser foot and sew; lift up edge of fabric to keep
it feeding smoothly.
NOTE: Use zigzag with stitch width 1.0 – 2.0 for
variation.
28