Table of Contents
Advertisement
Fragmentation
Threshold
RTS Threshold
Frequency
Ad-hoc Channel
Power Save Mode
Tx Burst
26
wireless card.
Set the value for fragmentation threshold. The default value is
2346.
Set the value for RTS threshold. The default value is 2347.
Please choose the wireless frequency for this card.
Please choose one channel. It must match the channel set in AP.
To save the power, you can choose Max Save or Fast Save. The
default setting is Disable.
MaxSave – It can save lots of power. However, the wireless
signal also is bad.
FastSave- It is standard mode for power saving.
Disable – The power will not be saved. However, the wireless
signal will be better.
Such function can increase the data transmission rate within a
short time. Choose Enable to activate the function, otherwise,
choose Disable to close the function.
Vigor N61 User's Guide
Advertisement
Table of Contents
