Table of Contents
Advertisement
Key Length
Default Key
Enable 802.1X
Authentication Config
20
Choose the key length for the wireless card. The method you
choose here must be the same as the method set in the
connected AP.
The number you typed here should be the same as the number
set in the connected AP. According to the input method you
selected, the characters that you have to set will differ.
For 10/26 Hexadecimal digits: Type 10/26 hexadecimal
numbers in this field.
For 5/13 ASCII digits: Type 5/13 ASCII characters in this
field.
Specify the one which is the same as the setting in the
connected AP.
It will be available when you choose Open System.
Such button will be available after you check Enable 802.1X.
You have to type the same parameters as set in the connected
AP. Otherwise the connection will not be successful.
Vigor N61 User's Guide
Advertisement
Table of Contents
