SPECIFICATIONS...23 WARRANTY REGISTRATION The CDS-1™ carries a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly writ- ten on the outside of the return package.
– Connect the unit into an electrical outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/ TV technician for help. - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 3 ®...
ELECTRIC SERVICE EQUIPMENT - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 4 ® The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• The LCD is designed to be clearly visible within the angles shown in Figure 2. Mount the control unit so that the visual angle is within this range. - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 6 ® Figure 2...
CDS-1's playback functions. For Example, when using two CDS-1 units and a Fader “Q” Start mixer, if your mixer’s crossfader is all the way to the left (player one is playing, player two is in cue or pause mode), and you move the fader at least 20% to the right, player two will begin to play and player one will return to cue mode.
In continuous mode the unit con- tinues to play track by track and returns to cue mode after all tracks have played. This function - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 8 ® 14 15 POWER...
Page 9
“Slow Down” in the CD’s pitch speed (Beats per min- ute - BPM) when the PITCH (21) function is acti- - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 9 ® SEARCH/SCAN BUTTON - This TRACK BUTTON - This buttons is...
Page 10
Be sure the local power matches the unit’s required power. 29. POWER SWITCH - This switch controls the unit's main power. - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 10 ® mixer or CD unit. Connect the ®...
PITCH SLIDER (21). If the meter read zero regardless of the PITCH SLIDER'S (21) position, the PITCH (27) function is not activated. - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 11 ® Figure 4...
2. LOADING DISCS The CDS-1 can play both 3 inch (8 cm) and 5 inch (12 cm) compact discs (CD’s). Odd shaped and oval CD’s are not compatible. When loading a CD into the unit always hold the disc by its' edges and place it in the disc tray.
The PAUSE INDICATOR (7 & 34) will glow when pause mode is activated or when a track is in cue mode. Figure 8 - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 13 ® Figure 7 Figure 9...
You can scan in 3 different forward and 3 different reverse speeds depending on how long the buttons are held down. Figure 10 - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 14 ® Figure 11...
LED (22) will begin to glow. If the pitch function is not activated neither the PITCH SLIDER (19) nor the PITCH BEND BUTTONS (18) will not function. To use the PITCH SLIDER (19) slide the - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 15 ® To activate the PITCH SLIDER Figure 13...
Page 16
Flashing red for +/-8%, off +/-12%, or glowing solid red for +/-16%. Note, the pitch function must be activated for a LED reading. ally return to - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 16 ® ll continue to the maximum of - it’s previous speed.
Page 18
Music playback will resume normal play. The IN BUTTON (10) and OUT BUTTON (11) LEDs will remain on to remind you that a loop is stored in memory. Figure 20 American Audio • CDS-1™ INSTRUCTION MANUAL • PAGE 18 ® Figure 19...
LED (9) and OUT BUTTON LED (16) will begin to flash indicating the LOOP has been activated. Figure 21 Figure 23 American Audio • CDS-1™ INSTRUCTION MANUAL • PAGE 19 ® - To reactivate a LOOP that is stored in memory Figure 22...
CUE BUTTON (6) when the unit is in cue mode and the unit will begin to playback. Playback will continue until the CUE BUTTON (6) is released. Use this function to create mixing and playback effects with other audio sources. Figure 24 American Audio • CDS-1™ INSTRUCTION MANUAL • PAGE 20 ®...
ADVANCED OPERATIONS FLIP-FLOP™ This feature is kind of “auto pilot. " “Flip-Flop” mode can only function with the use of two CDS-1 units. The “Flip-Flop” function may be used with or without an American Audio “Q” deck mixer, you can have one unit begin playback when the other ends.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which American Audio if the product has been repaired or serviced by anyone other than the American Audio prior written authorization was issued to purchaser by American Audio because not properly maintained as set forth in the instruction manual.