• Selectable Time Display • Auto Cue • Track Search by Frames • Fader Start for Audio & Video CHECK THE AMERICAN AUDIO WEBSITE FOR DOWNLOADABLE USER SOFTWARE UPDATES. FOR BEST CD-R DISC PLAYBACK RESULTS IN THIS CD PLAYER PLEASE FOLLOW THESE GUIDELINES: 1.
– Connect the unit into an electrical outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/ TV technician for help. - www.AmericanAudio.us - CDG-350 Instruction Manual Page 3 ®...
ELECTRIC SERVICE EQUIPMENT - www.AmericanAudio.us - CDG-350 Instruction Manual Page 4 ® The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Video Region Selector Switch The CDG-350 carries a ONE year (365 days) limited warranty. This warranty covers parts and labor. Please fill out the enclosed warranty card to validate your purchase and warranty. All...
Be sure main power is connected last to prevent any electrical damage. AUDIO CONNECTIONS: Use the included RCA cable to connect the CDG-350 outputs to the line inputs of a mixer. Never connect a CD player's output to a mixers "phono" inputs.
Page 9
19. CHANNEL 1 CONTROLLER JACK - Connect the supplied mini-plug from the CUE jack on the rear of your CD unit to the CONTROL out jack of a compatible American Audio mixer. This will enable the CD "Q-Start" function. This feature is only available on American Audio or American DJ “Q”...
Page 11
Plug the Video cable to the input connection on your TV or monitor. 36. VIDEO REGION FORMAT SELECTOR - This switch can select the video region for the CDG-350. NTSC for the U.S. and PAL for Europe. This selector switch works exactly like the voltage selector switch.
1. LOADING/EJECTING DISCS The CDG-350 can only play 3 and 5 inch CDs. Odd shaped, and oval CDs are not compatible. When loading a CD into the transport tray, always hold the disc by it edge (see Figure 8). Load the disc label side up and place it in the disc tray.
PITCH BEND BUTTONS (9) will function. Using the Pitch Slider (13): To use the PITCH SLIDER (13) slide the slider up and down. Down will increase the pitch and up will decrease the pitch. - www.AmericanAudio.us - CDG-350 Instruction Manual Page 16 ® Figure 11...
The speed you rotate the JOG WHEEL (17) will determine pitch bend percentage (%). Figure 15 - www.AmericanAudio.us - CDG-350 Instruction Manual Page 17 ® Figure 14...
To cancel and clear the program press and hold down the PROGRAM (2) for more than two seconds. - www.AmericanAudio.us - CDG-350 Instruction Manual Page 18 ® Figure 16 Figure 18...
MODE OTHERWISE NO GRAPHICS WILL BE DISPLAYED. HOOK UP THROUGH AN EXTERNAL R.F. MOD VIDEO IN AUDIO IN - www.AmericanAudio.us - CDG-350 Instruction Manual Page 19 ® AUDIO IN Option 1 is for TVs with Video input(s) (RCA jacks) ANT IN ANT.
To avoid damage, please don't switch off the power until "no disc" or "time code" is showed on the LCD after the disc holder has been closed with the OPEN/CLOSE button. - www.AmericanAudio.us - CDG-350 Instruction Manual Page 20 ®...
The sole responsibility of American Audio this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American Audio manufactured after January 1, 1990, and bear identifying marks to that effect.