INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
1. Helmet
2. Helmet holding cable
3. Helmet holder
3. Place the helmet on the right side
of the vehicle, and then install the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
To release the helmet from the hel-
met holder
Remove the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then install the
seat.
Storage compartment
3
1
1. Storage compartment
The storage compartment is located
under the seat. (See page 3-18.)
When storing the Owner's Manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get wet.
When washing the vehicle, be careful
[EWA10161]
not to let any water enter the storage
compartment.
WARNING
●
Do not exceed the load limit of 3
kg (7 lb) for the storage com-
partment.
EAU14453
EWA10961
3-19
●
Do not exceed the maximum
load of XJ6F 185 kg (408 lb)
XJ6FA 180 kg (397 lb) for the ve-
hicle.