Replacing The License Plate Light Bulb - Yamaha XJ6F Owner's Manual

1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
EAU24313
1
1. License plate light bulb socket
2. License plate light bulb
2
3. Remove the burnt-out bulb by pull-
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6. Install the license plate light unit by
6-40
ing it out.
bulb) by pushing it in.
installing the screws.
1
2
6