Replacing The Headlight Bulb - Yamaha XJ6F Owner's Manual

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
●
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
● Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU47411
ECA10650
1. Do not touch the glass part of the bulb.
1. Remove cowlings A and C. (See
page 6-8.)
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight bulb cover
2. Headlight coupler
3. Unhook the headlight bulb holder,
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into po-
1
2
5. Install the headlight bulb cover,
6. Install the cowlings.
7. Have a Yamaha dealer adjust the
6-38
and then remove the burnt-out
bulb.
2
sition, and then secure it with the
bulb holder.
and then connect the coupler.
headlight beam if necessary.
1
6