1. License plate light bulb socket
2. License plate light bulb
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
PERIODIC MAINTENANCE AND ADJUSTMENT
Auxiliary light bulb
1
2
1. Auxiliary light bulb
If the auxiliary light does not come on,
have a Yamaha dealer check the elec-
trical circuit or replace the bulb.
EAU39020
Front wheel (XJ6S)
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the front wheel
1
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the vehicle on the center-
2. Loosen the front wheel axle pinch
6-38
WARNING
WARNING
stand.
bolt, then the wheel axle and the
brake caliper bolts.
EAU44790
EWA14840
EAU42641
EWA10821
6