Replacing The Tail/Brake Light Bulb - Yamaha XJ6S Owner's Manual

1. Do not touch the glass part of the bulb.
1. Remove cowling B. (See page
6-7.)
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight bulb cover
2. Headlight coupler
PERIODIC MAINTENANCE AND ADJUSTMENT
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
1. Headlight bulb
2. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
1
2 5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the cowling.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the seat. (See page
2
2. Remove the socket (together with
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by pull-
6-36
3-18.)
the bulb) by turning it counter-
clockwise.
1
ing it out.
EAU47020
6