Brake Light Switches (Xj6S); Brake Light Switches (Xj6Sa) - Yamaha XJ6S Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1 2
(b)
1. Locknut (clutch cable)
2. Clutch lever free play adjusting nut (clutch
cable)
5. Tighten the locknut.
6. Install the cowling.
6

Brake light switches (XJ6S)

(a)
1. Rear brake light switch
2. Rear brake light switch adjusting nut
The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, adjust the rear brake
light switch as follows, but the front
brake light switch should be adjusted
by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).
EAU22273
1
2
(a)
(b)
6-23

Brake light switches (XJ6SA)

The brake light, which is activated by
the brake pedal and brake lever, should
come on just before braking takes ef-
fect. If necessary, have a Yamaha deal-
er adjust the brake light switches.
EAU36503