Seat; Adjusting The Shock Absorber Assembly - Yamaha WR125R Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
3
1. Bolt
To install the seat
1. Insert the projections on the front
of the seat into the seat holders as
shown.
EAU13960
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
TIP
Make sure that the seat is properly se-
cured before riding.
3-10
Adjusting the shock absorber
assembly
(b)
(a)
1. Spring preload adjusting nut
2. Position indicator
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To de-
EAU14832
ECA10101