Handlebar Switches - Yamaha WR125R Owner's Manual

Handlebar switches

Left
1. Pass switch "PASS"
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
Right
1. Engine stop switch " / "
2. Start switch " "
INSTRUMENT AND CONTROL FUNCTIONS
EAU12348
Pass switch "PASS"
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12360
Start switch "
Push this switch to crank the engine
with the starter. See page 5-1 for start-
EAU12400 ing instructions prior to starting the en-
/ "
gine.
" for the high
EAU12460
/ "
". When re-
EAU12500
"
EAU12660
/ "
" before starting
" to
3-5
EAU12711
"
3