Kickstarter; Seat - Yamaha AG200FEM 2021 Owner's Manual

Instrument and control functions
1

Kickstarter

2
3
4
5
1. Kickstarter
6
To start the engine, fold out the kick-
starter lever, move it down lightly with
7
your foot until the gears engage, and
then push it down smoothly but force-
fully. This model is equipped with a pri-
8
mary kickstarter, allowing the engine to
be started in any gear if the clutch is
9
disengaged. However, shifting the
transmission into the neutral position
10
before starting is recommended.
11
12
EAU13651

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
1
1. Bolt
1. Bolt
EAU13962
1
1
4-8
To install the seat
1. Insert the projections on the front
of the seat into the seat holders as
shown.
1
2
1. Projection
2. Seat holder
2. Place the seat in the original posi-
tion, and then tighten the bolts.
TIP
Make sure that the seat is properly se-
cured before riding.