Multi-Function Display; Engine Trouble Warning Light; Odometer And Tripmeter Modes - Yamaha WR125R Owner's Manual

TIP
G
For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
the coolant temperature in the ra-
diator.
G
If the engine overheats, see page
6-37 for further instructions.

Engine trouble warning light "

This warning light flashes or stays on if
an electrical circuit monitoring the en-
gine is not working correctly. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

EAUT1934
"
1. Multi-function display
2. "RESET/SELECT" button
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function display is equipped
with the following:
G a speedometer
G an odometer
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
EAUM2671
G
G
TIP
G
G
EWA12312
Changing
G

Odometer and tripmeter modes

A brief push (less than one second) on
the "RESET/SELECT" button switches
the display between the odometer
3-3
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
an oil change indicator (which
flashes when the engine oil should
be changed)
a fuel meter
Be sure to turn the key to "ON" be-
fore using the "RESET/ SELECT"
button.
When the key is turned to "ON", all
segments of the display come on
for a few seconds. During this
time, the multi-function display is
performing a self-test.
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, press the "RESET/SE-
LECT" button for at least eight sec-
onds.
3