Instrument and control functions
Seat
To remove the seat
1. Remove the mudguard by remov-
ing the bolts and washers.
4
1. Bolt and washer
2. Mudguard
2. Pull the seat off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
1
2
1. Seat holder
2. Projection
2. Place the seat in the original posi-
tion.
3. Install the mudguard by installing
the washers and bolts.
EAU40921
TIP
Make sure that the seat is properly se-
cured before riding.
1
2
4-8