Replacing A Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha Fazer FZS1000 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Tail/brake light bulb cover
Replacing a tail/brake light
bulb
1. Remove the seat. (See page 3-11
6 for seat removal and installation
procedures.)
2. Remove the tail/brake light bulb
cover.
1. Socket
3. Remove the socket (together with
EAU03961
the bulb) by turning it counter-
clockwise.
4. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the bulb cover.
8. Install the seat.
1. Screw
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
2. Remove the defective bulb by
3. Insert a new bulb into the socket,
4. Install the lens by installing the
6-39
by removing the screw.
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
screw.
EAU03497