Inspecting The Brake Fluid Level - Yamaha DT125R Owner's Manual

Dt 2000
Hide thumbs Also See for DT125R:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
FRONT
1
1
2
3
1. Minimum level mark
4
Inspecting the brake fluid
level
5
Insufficient brake fluid may let air
enter the brake system, possibly
6
causing the brakes to become inef-
fective.
7
Before riding, check that the brake
fluid is above the minimum level and
8
fill when necessary.
Observe these precautions:
9
8 When checking the fluid level,
make sure the top of the master
cylinder is level by turning the
handlebars.
REAR
1
1. Minimum level mark
EAU00732
8 Use only the designated quality
brake fluid. Otherwise, the rub-
ber seals may deteriorate, caus-
ing leakage and poor brake per-
formance.
Recommended brake fluid:
DOT 4
NOTE:
If DOT 4 is not available, DOT 3 can
be used.
6-24
8 Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and
lead to poor brake performance.
8 Be careful that water does not
enter the master cylinder when
refilling. Water will significantly
lower the boiling point of the fluid
and may result in vapor lock.
8 Brake fluid may deteriorate paint-
ed surfaces or plastic parts.
Always clean up spilled fluid
immediately.
8 Have a Yamaha dealer check
the cause if the brake fluid level
goes down.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents