Yamaha FJR1300A Owner's Manual page 34

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Push the rider seat lock lever, lo-
cated under the back of the rider
seat, to the left as shown, and then
pull the seat off.
1. Rider seat lock lever
2. Rider seat
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
1. Projection
2. Seat holder
3-20
2. Install the passenger seat.
NOTE:
G
Make sure that the seats are prop-
erly secured before riding.
G The rider seat height can be ad-
justed to change the riding posi-
tion. (See page 3-21.)