Yamaha FJR1300A Owner's Manual page 25

G
If the ambient temperature climbs
above 50 °C, a higher temperature
than 50 °C will not be displayed.
G The accuracy of the temperature
reading may be affected when
riding slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption mode
This display shows the distance that
can be traveled on 1.0 Imp.gal of fuel
under the current riding conditions.
INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
If traveling at speeds under 10 km/h
(6.0 mi/h), "_ _" will be displayed.
Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel
consumption since it was last reset.
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then "AV _ _
MPG" (average distance that can be
traveled using 1.0 Imp.gal of fuel) is dis-
played.
3-11
NOTE:
G
To reset the average fuel con-
sumption display, push the "RE-
SET" button to select the mode
again, and then push the "RESET"
button for 1 second while the dis-
play is flashing.
G
After resetting the average fuel
consumption display, "_ _" will be
shown for that display until the ve-
hicle has traveled 1 km (0.6 mi).
CAUTION:
If there is a malfunction, "- -" will be
displayed. Have a Yamaha dealer
check the vehicle.
3
ECA15470