Loading Saved User Program Sets - Roland KR117/115 Owner's Manual

Chapter 7 User Program Registration
When you touch <Ins>, a space is inserted at the cursor
position.
5.
When you have finished with the name, press the [Exit]
button.
Determining the Save Destination
6.
Touch <Media>
destination strage media.
7.
Touch <File>
destination User Program number.
If a User Program set name is displayed, a User Program
set saved to that number is already.
If you select a number with previously saved User
Program set data, then save a new set of data to that
same number, the older User Program set will be
deleted. If you don't want to lose any previously saved
User Programs, select a number in the save-destination
column that does not yet have a name.
Saving
8.
Touch <Execute> to begin the save.
Press the [Exit] button to return to the User Program File
screen.
* Never turn off the power or eject the external memory from
the external memory port while the operation is in
progress. Doing so will damage the KR's internal memory,
making it unusable.
→ When clearing the set of saved User Programs, refer to
"Deleting Saved User Program Sets" (p. 133).
132
to select the save-
to select the save-
■ Loading Saved User Program
Sets
User Programs that have been saved on external memories or
in user memory can be called up, on an individual set basis,
to the [User Program] button.
* Note that calling up these User Programs results in the
deletion of all User Programs currently recorded to the
[User Program] button.
When loading a set of User Programs from an external
memory, first connect the external memory to the external
memory port.
→ For more on working with the external memory, refer to
"Using External Memories" (p. 113).
1.
Press the [User Program] button.
2.
Touch <File>.
3.
Touch <Load>.
A "Load User Program screen" like the following
appears.
fig.d-upgload.eps_50
Specifying the Set of User Programs to be
Loaded
4.
Touch < > < > to select the storage media to be
read from.
Touch the scroll bar and drag up or down to scroll
through the screen and display other name of User
Programs.
5.
Touch the name of User Program to load.
6.
Touch <Execute>.
The selected User Programs are loaded to the [User
Program] button.
* Never turn off the power or eject the external memory from
the external memory port while the operation is in
progress. Doing so will damage the KR's internal memory,
making it unusable.