Data Management Via The Fr-3X's Usb Port; Saving User Program Memories To Usb Memory (Optional); Loading User Program Memories From Usb Memory (Optional) - Roland FR-3X V-Accordion Owner's Manual

FR-3x V-Accordion

Data management via the FR-3x's USB port

12. Data management via the FR-3x's USB port
The FR-3x allows you to save and import User Program settings to/from an optional USB memory connected to its USB
port. You can also import Sets and new sounds copied to your USB memory using your PC. The Sets and sounds are
stored internally.
Saving User Program memories to
USB memory (optional)
Here is how to archive the contents of the FR-3x's 10
internal User Program memories (file extension ".UP3")
to an optional USB memory.
NOTE
Be sure to connect your USB memory before proceeding.
1.
Connect an optional USB memory to the
FR-3x.
See page 34.
2.
Press and hold down the [SET] register.
The display shows the name of the last parameter
you selected.
3.
Use treble register [3] or [4] (PARAM LIST)
to select "SAU" (Save).
4.
Use treble register [1] or [2] (VALUE) to see
the number of the file where the data will
be saved.
The display shows the name of the first empty file on
the USB memory.
NOTE
The FR-3x uses numbers as file names to save your User
Programs to USB memory. It cannot display the file num-
bers that already are in the USB memory.
5.
Press treble register [7] (ENTER).
The display shows "Urt" (Write), then "don" (Done),
after which the FR-3x returns to the main page.
40
Loading User Program memories
from USB memory (optional)
The function discussed here allows you to load the set-
tings of 10 User Programs from a USB memory to the
FR-3x's internal memory.
NOTE
Be sure to connect your USB memory before proceeding.
1.
Connect an optional USB memory to the
FR-3x.
See page 34.
2.
Press and hold down the [SET] register.
The display shows the name of the last parameter
you selected.
3.
Use treble register [3] or [4] (PARAM LIST)
to select "UPG" (User Program).
SAV
4.
Use treble registers [1] and [2] (VALUE) to
select the file number of the User Programs
you want to load.
The display shows "---" instead of a number.
5.
Press treble register [7] (ENTER) to load the
selected User Programs.
The display shows "lod" (Load), then "don" (Done),
after which the FR-3x returns to the main page.
Upg