Before Calling Service - Beko WMD 25080 R User Manual

8

Before calling service

You turned the machine on, but the leds are off on
the panel.
Check the grounding on the power cable or a blown fuse.
Check the front door proper closure.
Machine does not take water.
Check the front door for proper closure. Either taps are
closed or water intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed as described in the us-
ers manual or not.
Descriptions of the international textile care label (ITCL) symbols
Water coming from beneath the machine.
Check the water intake and drain hoses. Tighten the con-
nections. The washers of the hoses may be worn out. If
non of the both, the pump filter is not closed properly.
Foam coming out of the detergent dispenser.
Check whether your detergent is suitable for automatic
machines. Next time use less detergent.
Pump does not drain water.
Clean the pump filter. Check whether the drain hose is
bent or not. If there is need to clean the pump filter, refer to
the pump filter cleaning section of the manual.
24