Lamp Replacement - Westinghouse WIM1000 User Manual

LAMp REpLAcEMENt –ModELS wiM1200,
wRM1300 & wRM2400
The reversing of doors or replacement of light bulbs is not
covered by warranty. Assistance, if required can be arranged by
calling our service centre on 13 13 49. Normal service call and
labour charges apply.
1. Switch off the power at the power point and remove the cord
by pulling the plug.
2. Remove the screw from the centre of the control panel.
3. Remove the light lens by pushing back and down on the
clear plastic tab protruding from the bottom of the lens.
4. Unscrew the spent light bulb in an anti-clockwise direction.
5. Screw the replacement bulb into the socket in a
clockwise direction.
6. Replace the light lens and screw.
7. Wait 5 minutes to ensure pressures in the refrigeration
system are equalised, before turning the refrigerator on
at the power point.
WARNING
warning
Never insert your finger into the light bulb socket.

laMp replaceMent

16
LAMp REpLAcEMENt–ModEL wiM1000
1. Switch off the power at the power point and remove the
cord by pulling the plug.
2. Slide out the drip tray from beneath the ice box.
3. Unscrew the light bulb in an anti-clockwise direction.
4. Screw the replacement bulb into the socket in a
clockwise direction.
6. Replace the drip tray.
7. Wait 5 minutes to ensure pressures in the refrigeration
system are equalised, before turning the refrigerator on
at the power point.
WARNING
warning
Never insert your finger into the light bulb socket.
tips and inForMation TIPS & INFORMATION
Not all 15 watt screw-in lamps will fit the lamp housing.
Appropriate replacement lamps can be purchased from
Electrolux or by calling 13 13 50.