Using Your Refrigerator - Wse6100 - Westinghouse WSE7000 User Manual

iCE & wAtER fEAtURES (wHERE fittEd)
twiSt iCE & SERvE
To use, remove the tray, fill with water and place back in
the freezer Once ice has formed (approximately 3 hours)
simply twist the knob at the front clockwise until the ice
drops into the bin below
iCE & wAtER diSpENSER fEAtURES
The ice and water dispenser conveniently dispenses cool,
filtered water and ice cubes or crushed ice To operate the
ice dispenser, select an ice option using the electronic
display and press glass against ice dispensing paddle
To stop dispensing ice, pull the glass away from the ice
dispensing paddle. Remove the glass from the dispenser
paddle when it is approximately half full Ice already in the
chute may cause the glass to overflow or back up into the
chute and cause a blockage (refer to troubleshooting guide
on how to unblock the ice chute)
To operate the water dispenser, press a glass against the
dispensing paddle To stop dispensing water, pull the
glass away from the water dispensing paddle As the
ice and water cut-off is not instant, leave glass under the
dispenser until the ice and water has completely stopped
to avoid spills A drip tray located at the base of the
dispenser (see diagram above) will catch small spills and
allow them to evaporate The drip tray is removable and
dishwasher safe Opening the freezer door will de-activate
the ice dispenser
CAUTION
Do not pour water or excess cubes into the drip tray
because it is not connected to a drain
WARNING
Do not use fragile glass for dispensing water or ice – risk of
injury from broken glass
bottLE fiLLiNG fUNCtioN
The Aqua Direct bottle filling function facilitates the flow
of water directly into the mouth of a bottle, minimising
splashing and spillage Water flows from the water
dispensing nozzle located on the underside of the ice
and water dispenser
To use this function, place the mouth of the bottle over the
water dispensing nozzle
ice paddle
water paddle
Once the mouth of the bottle is completely over the water
dispensing nozzle (see diagram below) gently push bottle
drip tray
up to dispense water and fill bottle Once the bottle
is full, remove the bottle and the flow of water will
stop automatically
water
dispenser
using your refrigerator 19