Westinghouse WSE7000 User Manual page 14

iCE & wAtER iNStALLAtioN
Step 8
Push shorter tube into tap fitting past insertion mark
Step 9
Push other end into filter inlet
water
flow
direction
Step 10
Connect remaining tube length to filter outlet
Step 11
Connect other end of remaining tube length to inlet on
bottom right hand side of refrigerator back
Ensure black circlip is fitted to the valve on the rear of the
fridge when making this connection
14 installation
Step 12
Turn on water and check all joints and tubes for leaks
Step 13
Reconnect the power.
Step 14
Move the refrigerator back into place being careful not to
kink or split the tubing
inlet
location