Using The Weatheradio's 'All Signals' Code - Radio Shack 12-250 Owner's Manual

2. When your Weatheradio displays weather alert
information for an alert type you want to change,
press
YES
not already sounding) or
tone is sounding).
When there are no more alerts being displayed,
SELECT CHECK
3. To view each alert type, repeatedly press
The alert type and
(if the alert is turned off) appears.
OFF
4. To resume normal operation, set
.
ATE
Using the Weatheradio's 'All Signals'
Code
Your Weatheradio is preset to use a default "all sig-
nals" code of 99, which lets it receive any weather alert
broadcast within the Weatheradio's reception range
(about a 50-mile radius in most locations). This code is
preset in the Weatheradio's first memory location.
To set the Weatheradio to respond only to specific
NWS FIPS codes you select, choose the codes (as
many as 15) you want to program (see "Understand-
ing FIPS Codes" on Page 17 and "Obtaining Your Ar-
ea's FIPS Code(s)" on Page 18), program those
codes into memory locations 2–15, and set the
Weatheradio to its multiple mode (see Steps 5 and 6
under "Programming the Weatheradio" on Page 26).
to enable the alert tone (if the tone is
appears.
(if the alert is turned on) or
ON
to disable it (if the
NO
MODE
.
YES
to
OPER-
41