Choosing A Location And Mounting The Weatheradio - Radio Shack 12-250 Owner's Manual

To connect an external antenna to the Weatheradio,
connect one end of the adapter cable to
the back of the Weatheradio then connect the other
end to the antenna.
CHOOSING A LOCATION AND
MOUNTING THE WEATHERADIO
You can set your Weatheradio on any flat surface
(such as a shelf or counter top), or you can mount it
on a wall using the supplied mounting bracket and
two screws (not supplied) with heads that fit the key-
hole slots on the mounting bracket.
For the best reception, place your Weatheradio
where:
• it can receive alert signals (see "When a Test or
Demo Alert Occurs" on Page 43)
• you can hear its alert tone (see "Setting the Alert
Volume" on Page 37)
on
EXT ANT
23