1. Turn off the Weatheradio.
2. Hold down
wise to turn on the Weatheradio.
appears.
3. Press the number keys (
grammed NOAA weather frequencies.
4. Press
%((3#21
%((3#21
%((3#21
%((3#21
%((3#2))
%((3#2))
%((3#2))
%((3#2))
Important: The next step erases any FIPS
codes or weather channels you programmed.
5. To erase the Weatheradio's memory and restore
the factory settings, press
6. Press
WEATHER
7. To exit Test Mode, turn off the Weatheradio.
USING THE WEATHERADIO'S 'ALL
SIGNALS' CODE
This Weatheradio is preset to the
mode (see Page 16), which lets it receive all SAME
broadcasts within a 50-mile radius.
22
WEATHER
; ; ; ;
to test the Weatheradio's alert beep.
appears. Press
appears
to see all the display elements.
Programming
and turn
VOLUME
) to verify the pro-
1–7
again to stop the alert.
8
.
9
$//#/2&
$//#/2&
$//#/2&
$//#/2&
clock-
7(6702'(
7(6702'(
7(6702'(
7(6702'(
(all signals)