Radio Shack 22-178 Owner's Manual page 4

22-178.fm Page 4 Friday, August 6, 1999 11:38 AM
Data Hold Function — holds the display so you can see
the reading even after you disconnect the probes.
Overload and Transient Protection — helps protect the
meter from overvoltage in most ranges.
Continuity Buzzer Function — lets you quickly hear if
there is continuity in a cable or between two points.
Diode Check Function — lets you safely check semi-
conductors for open, shorted, or normal junctions.
Auto-Polarity Operation — protects your meter and
gives valid measurements even when you connect the
leads in reverse polarity.
Low-Battery Indicator — shows when you need to re-
place the batteries.
Fold-Out Stand — lets you adjust the meter's position
for the best visibility on a flat surface.
Protective Holster — protects the meter from damage
and lets you hang the meter on a wall.
Note: Your multimeter requires two AA batteries (not
supplied).
4