Operating Instructions; Configuring The Starting Address; Control Panel Functions; Menu Map - Chauvet SlimPAR Pro VW User Manual

4. O
PERATING

Configuring the Starting Address

Control Panel Functions

Menu Map

M F
AIN UNCTION
DMX Address
Personality
Dimming Curve
Color
Temperature
Preset
Custom Static
Color
Auto Program
SlimPAR Pro VW User Manual
I
NSTRUCTIONS
The SlimPAR™ Pro VW fixture uses 7 DMX channels in its maximum setting. In this DMX
configuration/personality, the highest channel that the fixture may be set to in order to function
properly is 506. Any address higher than this will prevent access to all of the channels, while in this
mode; however, if you desire to use one of the other DMX channels configurations (personalities),
please consider the total DMX channels when selecting a DMX address.
Access control panel functions using the four buttons located directly underneath the LED display
on the included wired remote.
B
UTTON
Used to scroll through the
current operating mode,
<MENU>
as well as back out of the
current menu option
Used to select a move to
the right in the menu map
<ENTER>
and select a value and
store it to memory
Used to select increasing
<UP>
advancement in the value
Used to select decreasing
<DOWN>
advancement in the value
The Control Panel shows the current state of the unit. It is used to select the operating
mode, as well as the sub-features. For a detailed layout of the control panel functions,
please see the "menu map" section.
S S -S
ELECTION UB
AddR d001~d512
7CH
3CH
PERS
2CH
OFF
dIM1
dIM
dIM2
dIM3
C-01
C-02
C-03
C-04
C-- C-05
C-06
C-07
C-08
C-09
A000~A255
W000~W255
U--
S000~S020
P--1~P--5
P--
S000~S100
There is no strobing in the following modes:
Channel DMX mode.
F
UNCTION
ELECTION
DMX starting address selection
7-channel operating mode
3-channel operating mode: warm/cool white color
temperature mixing with dimmer
2-channel operating mode: warm/cool white color
temperature mixing
Dimming curve: off
Dimming curve: dim 1
Dimming curve: dim 2
Dimming curve: dim 3
White 1
White 2
White 3
White 4
White 5
White 6
White 7
White 8
White 9
Combine warm and cool white to create a custom, static
color temperature mix
000
Strobe speed (
Program selection
Run speed
C-- P--
and
10
MENU ENTER UP DOWN
D
ESCRIPTION
=no strobe)
. For full function control, use 7-
Rev. 3