Pentax *istD Operating Manual page 88

e_000_kb321.book Page 87 Wednesday, August 27, 2003 12:09 PM
4
Push down on the portion in
the illustration to retract the
flash.
Setting Flash Modes
1
Press the flash mode button to
select a flash mode.
The flash mode on the LCD panel cycles
as shown in the chart with each press of
the button.
Flash modes for each capture mode
Flash modes differ by capture mode. See below for the flash modes
corresponding to each capture mode. (The indications shown are with the
built-in flash popped up.)
• Green program AE mode
Automatic flash
Red-eye reduction
automatic flash
87
4