Pentax *istD Operating Manual page 129

e_000_kb321.book Page 128 Wednesday, August 27, 2003 12:09 PM
128
Item
F step other
than A
Release
when
Charging
Flash in
Wireless
Mode
Flash with OK
Button
Meter
Operating
Time
6
Self-timer
Delay Time
Remote
Control Delay
Superimpose
AF Area
Use LCD w /
Video Output
Color Space
Reset
Custom
Function
Setting items
Disables shutter release when lens aperture is set at
Off (Default Setting)
other than A.
On
Enables shutter release even when lens aperture is set at
other than A.
Disables shutter release while the built-in flash is
Off (Default Setting)
charging.
Enables shutter release while the built-in flash is
On
charging.
On (Default Setting) Fires built-in flash as master in Wireless Mode.
Off Fires built-in flash as controller in Wireless Mode.
Off (Default Setting) Disable external flash firing with OK button.
Test Test fires external flash with OK button.
Modeling Fires modeling flash of external flash with OK button.
3sec Sets exposure metering timer to 3 seconds.
5sec Sets exposure metering timer to 5 seconds.
10sec (Default Setting) Sets exposure metering timer to 10 seconds.
15sec Sets exposure metering timer to 15 seconds.
30sec Sets exposure metering timer to 30 seconds.
12sec (Default Setting) Sets self-timer delay time to 12 seconds.
2sec Sets self-timer delay time to 2 seconds.
3sec (Default Setting) Shutter will be released 3seconds after remote control is
pressed.
0sec Shutter will be released immediately when remote control
is pressed.
On (Default Setting) Superimposed AF area is displayed
Off Superimposed AF area is not displayed
Off (Default Setting) LCD monitor is turned OFF during video output.
On LCD monitor turned ON during video output.
sRGB (Default Setting) Sets to sRGB color space.
Adobe RGB Sets to AdobeRGB color space.
Reset / Cancel Resets Custom Function X to default settings.
Explanation