Panasonic KX-TG9541 Operating Instructions Manual page 70

Useful Information
Answering system
Problem
The unit does not record new
messages.
I cannot operate the answering
system remotely.
The unit does not emit the
specified number of rings.
Bluetooth PIN
Problem
I cannot remember the PIN.
Liquid damage
Problem
Liquid or other form of moisture
has entered the handset/base
unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
70
Cause/solution
R The answering system is turned off. Turn it on (page 54).
R The answering system does not answer or record calls from
cellular lines.
R The message memory is full. Erase unnecessary messages
(page 56).
R The greeting setting is set to "Greeting only" or
Greeting1&Only. Change the setting (page 54).
R If you subscribe to a voice mail service, messages are recorded
by your service provider/telephone company, not your
telephone. Change the unit's number of rings setting or contact
your service provider/telephone company (page 60).
R The answering system can only record calls from 1 line at a
time.
R The remote access code is not set. Set the remote access code
(page 59).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 59).
R The answering system is turned off. Turn it on (page 60).
R You cannot operate the answering system when calling a
cellular phone paired to the base unit.
R If the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Cause/solution
R Change the PIN using the following method.
1
MMENUN#619
2
*7000
3
Enter the new 4-digit PIN. a MOKN
4
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
Cause/solution
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorized service center.
For assistance, please visit http://www.panasonic.com/help