Caller Id Number Auto Edit Feature - Panasonic KX-TG9541 Operating Instructions Manual

Caller ID Service
Base unit
1
MCIDN
2
Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3
To call back, press the desired cellular line key
(MCELL 1N to MCELL 4N).
To exit, press MEXITN.
n Using the landline
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
Press MCN to search from the most recent call,
or MDN to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press the desired landline key
(ML1N or ML2N).
– To exit, press MOFFN.
Base unit:
– To call back, press the desired landline key
(MLINE 1N or MLINE 2N).
– To exit, press MEXITN.
Note for handset and base unit:
R If the entry has already been viewed or
answered, " " is displayed, even if it was
viewed or answered using another unit.
R to indicates the caller information was
received from the cellular line.
R and indicates the caller information was
received from the landline.
Editing a caller's phone number
You can edit a phone number in the caller list by
removing its area code and/or the long distance
code "1".
Handset
1
MCN CID
2
MbN: Select the desired entry.
3
MMENUN a MbN: "Edit" a MSELECTN
4
Press MEDITN repeatedly until the phone
number is shown in the desired format.
48 For assistance, please visit http://www.panasonic.com/help
5
Using a cellular line:
To make a cellular call, continue from step 3,
"Viewing the caller list and calling back",
page 47.
Using the landline:
Press ML1N or ML2N.
Base unit
1
MCIDN
2
MbN: Select the desired entry.
3
Press MEDITN repeatedly until the phone
number is shown in the desired format.
4
Using a cellular line:
To make a cellular call, continue from step 3,
"Viewing the caller list and calling back",
page 47.
Using the landline:
Press MLINE 1N or MLINE 2N.
R If the indicated line is already being used or
you want to select the other line:
Handset: Press ML1N or ML2N.
Base unit: Press MLINE 1N or MLINE 2N.

Caller ID number auto edit feature

Handset / Base unit
Once you call back an edited number, the unit
which was used to call back remembers the area
code and format of the edited number. The next
time someone calls from the same area code,
caller information is customized by the unit as
follows:
– When the call is being received, the Caller ID
number is displayed in the same format as the
edited number.
– After the call has ended, the caller's phone
number is displayed in the same format as the
edited number, when reviewed from the caller
list.
For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller's area code are
edited automatically.
This feature can be set for each unit (page 42).
The default setting is "On".