Table of Contents
Advertisement
RX3042H User's Manual
9. Click Apply to save the settings
5.2.6 PPTP
Some of the service providers require user to login using PPTP
connection.
5.2.6.1 WAN PPTP Configuration Parameters
Table 5.5 describes the configuration parameters available for
PPTP connection mode.
Table 5.5. WAN PPTP Configuration Parameters
Setting
Description
Link
Select a port to configure. Available options are WAN1,
WAN2 or DMZ.
Connection
Select PPTP from the connection mode drop-down list.
Mode
WAN
Select how WAN IP address is to be configured – static
Interface IP
(manually set the IP address) or dynamic (obtained
automatically from the DHCP server).
Static
Choose this connection mode if the WAN IP is a fixed IP
provided by your ISP.
IP Address
Enter the WAN IP address provided by your ISP.
Subnet Mask Enter the subnet mask for the WAN IP provided by your ISP.
Gateway
Enter the gateway IP address for the WAN provided by your
Address
ISP.
Dynamic
Select this connection mode if your WAN IP address is
(DHCP)
obtained automatically from your ISPʼs DHCP server.
User
Enter the username and password you use to log into your
Name and
ISP. (Note: this is different from the information you used to
Password
log into Configuration Manager.)
Server IP
Enter the PPTP server IP address provided by your ISP.
Address
MTU
You may specify the maximum size of the transmitted packet.
For PPTP, the range of MTU is from 546 to 1460. The default
value is 1460.
MPPE
MPPE stands for Microsoft Point-to-Point Encryption
protocol. Check this box, if the packet is to be encrypted w/
this protocol.
Router Setup
39
Advertisement
Table of Contents
