Part 3 - Quick Conﬁguration Of The Rx3042H; Setting Up The Rx3042H - Asus RX3042H User Manual

Table of Contents

Quick Start Guide

server).

• You maintain different subnets on your LAN.

However, during the ﬁrst time conﬁguration of your RX3042H, you

must assign an IP address in the 192.168.1.0 network for your

PC, say 192.168.1.2, in order to establish connection between the

RX3042H and your PC as the default LAN IP on RX3042H is pre-

configured as 192.168.1.1. Enter 255.255.255.0 for the subnet

mask and 192.168.1.1 for the default gateway. These settings may

be changed later to reﬂect your true network environment.

On each PC to which you want to assign static information, follow

the instructions on pages 11 through 12 relating only to checking

for and/or installing the IP protocol. Once it is installed, continue to

follow the instructions for displaying each of the Internet Protocol

(TCP/IP) properties. Instead of enabling dynamic assignment of the

IP addresses for the computer, DNS server, and default gateway,

click the radio buttons that enable you to enter the information

manually.

3.3 Part 3 — Quick Conﬁguration of the RX3042H

In Part 3, you log into the Conﬁguration Manager on the RX3042H

and configure basic settings for your router. Your ISP should

provide you with the necessary information to complete this step.

Note the intent here is to quickly get the RX3042H up and running,

instructions are concise. You may refer to corresponding chapters

for more details.

Follow these instructions to setup the RX3042H:

12.Before accessing the Conﬁguration Manager in RX3042H, make

sure that the HTTP proxy setting is disabled in your browser. In

IE, click "Tools" -> "Internet Options..." -> "Connections" tab ->

"LAN settings..." and then uncheck "Use proxy server for your

LAN ..."

Note: Your PCs must have IP addresses that place

them in the same subnet as the RX3042Hʼs LAN

port. If you manually assign IP information to all your

LAN PCs, you can follow the instructions in Chapter

5 to change the LAN port IP address accordingly.

RX3042H User's Manual

Table of Contents