BT RESPONSE 123e User Manual page 15

Press and hold down the
Response 123e will announce,
"Please select outgoing message".
Press
for OGM2. The
message for the OGM you
have selected is announced.
Your Response 123e then invites
you to record your own OGM.
Press the
The OGM is set.
You can record your own
outgoing messages for OGM1
and OGM2, each up to 3
minutes long.
OGM2 is 'Answer only' so your
version of this message should not
invite callers to leave a message.
Press and hold down the
Response 123e will announce,
"Please select outgoing message".
button. Your
for OGM1 or
button.
button. Your
Select the OGM you want to
re-record by pressing
for OGM1 or
The current message for the
OGM you have selected is
announced. Your Response
123e then invites you to record
your own OGM.
Press and hold down the
button to commence recording.
After the beep, speak clearly
about 15–30cm from the
microphone. The message
counter will flash
recording is in progress.
Release the
end recording. Your Response
123e will announce, "Your
outgoing message is..." and will
play the message back to you.
Your current outgoing message
is played back to you when
you switch the answering
machine on by pressing the
button. If the
answering machine is already
on, press the
button to switch it off, then
press it again to switch it back
on again and hear your current
OGM. The message counter
switches between P (message
playback) and the currently
selected OGM, eg. 2.
for OGM2.
to indicate
button to
13