Recalling The Preprogrammed Three-Digit Number; Setting Back Light - Home Theater Master MX-500 User Manual

1. Go to the programming mode by pressing the MAIN and ENTER
button simultaneously for three seconds.
2. Press the RECAL button in programming mode.
3. The LCD display will alternately flash device names and the three-
digit code number assigned to the device for 10 seconds and then exit
to main mode.
1. Go to the programming mode by pressing the MAIN and ENTER
button simultaneously for three seconds.
2. Press the LIGHT button in programming mode.
3. Using the number pad button, enter the desired back light time (in
seconds). It can go up to 99 seconds. Enter the time by pressing the
SAVE button on the LCD.
4. Exit from the Set Up mode by pressing the MAIN button.
24