Garrett PD 6500i User Manual page 26

3.5.5 ALARM COUNT
A built-in and user resettable alarm counter records the number of alarms that
have occurred. This is a "view only" menu item. The alarm count is
automatically reset to zero when the patron counter is reset.
Press ACCESS for the next menu item or OPERATE to resume normal
operation.
3.5.6 ALARM COUNT %
A built-in and user resettable alarm count % calculates the percentage of
alarms to patrons. This is a "view only" menu item. The alarm count % is
automatically reset to zero when the patron counter is reset.
Press ACCESS for the next menu item or OPERATE to resume normal
operation.
3.5.7 SEQUENCE
SEQUENCE <number of times the system has been successfully accessed
via password>. This is a "view only" menu item.
Press ACCESS for the next menu item or OPERATE to resume normal
operation.
3.5.8 RESET COUNTER
RESET COUNT will appear on LCD. For Operator Access Level user to reset
counter, the Administrator must have the Operator Enable set to "ON" position.
Supervisor and Administrator Access level personnel may also reset counter
by logging on with their own personal user login code.
To reset counter, press the
The patron count, alarm count and alarm count % will all reset to zero.
Press ACCESS for the next adjustment or OPERATE to resume normal
operation.
3.5.9 ADJUST TONE
TONE <current tone setting>, appears on LCD. If user is authorized to adjust
the tone, the user may use the + / - touchpads to adjust the tone from 1
(low bass) to 9 (high treble).
Press ACCESS for next adjustment or OPERATE to resume normal operation.
3.5.10 PACING LIGHTS
Pacing lights located on the side panels of the entrance side indicate
whether or not a patron may enter the walk-through. The green proceed
symbol (
©2003 GARRETT METAL DETECTORS
GARRETT PD 6500i
USER MANUAL
+ touchpad for approximately 10 seconds.
) indicates proceed and the red wait symbol (
26
) indicates wait.
PN 1532010 REV A