Gianni Industries DG-100 Operation User's Manual

DG-100 Split Digital Keypad Entry system
Operation User's Manual (5 Codes)
1. Product Characteristic:
Allows up to 99 PIN codes
Random user codes for anti-peeping
Fully Programmable via keypad and master code
LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
Metal die casting housing
Deftly dimension for narrow jamb
With vandal resistant screws
Split of controller and reader for high security.

2. Specifications:

Operating Voltage: 12 Vdc
Current Draw: Average 15mA, Peak 70mA @ 12Vdc
Output: N.O./N.C./Com. Output (free voltage contact)
Relays Rated: 2A MAX @30Vdc ；0.4A @ 120Vac
Relay Activation Time: （＊100）
Strike Time: 1~99 seconds（adjustable）
Strike mode: Access Timer or Latch
PIN codes: 5 digit codes
User codes capacity: 99 slots
Operating Temperature: -20~+70℃
Ambient Humidity: 5~95% relative humidity non-condensing
Factory Master Code: 12345
Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of
incorrectly Master Codes enrolled or PIN codes attempted（None beeper signal of
keypad activations）.
EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.
Color: Beige White
Distance between the keypad and controller board: Maximum 50 M (cable#22~26 AWG).
3. The indicator signal chart:
Sound and LED indicator:
Green LED
LED signal
Yellow LED
Sound signal
Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-DG100-5C Ver. C Published on 2009.06.15
Relay activated
Red LED Power on, stand-by
Programming mode
1 Beep Key-in, Effective PIN codes
Entering 、Exiting from the Program mode
2 Beeps
Data computing error 、 other operation mistakes
3 Beeps
Master Code reset to Factory （12345）or remove all
5 Beeps
stored user codes
Page: 1/ 3