LD series (with backlite buttons) , WP series (with waterproof metal buttons) LED Status Indication 3 LED indicators display (Red/Yellow/Green) 1 contact for Request-To-Exit button (N.O.) Input 1 contact for door reed switch Copyright Gianni Industries, Inc. All Rights Reserved. P-MU-DG25 Ver. D Publish:2010.08.12 DG-25/26/27 Digital Keypad Operation Manual...
Page 2
To Delete a User Code:(at programming mode) Press the slot position code of your choice to delete (example "006") →Press「*006」 →「00000」→(beep)→delete→Press「#」 to exit from the programming mode. Copyright Gianni Industries, Inc. All Rights Reserved. P-MU-DG25 Ver. D Publish:2010.08.12 Relay 1 is controlled by 001~049 user slots...
Page 3
The suggested wire gauge is #22~26 AWG. The door strike or relay must have a varistor or a diode across the door strike terminals to suppress the back EMF of the strike-failure to do so will damage the relay contacts and electronic components , or even burns the controller.
This manual is also suitable for:
Dg-27Gem dg-25 seriesGem dg-26 seriesGem dg-27 series