Page of 3
Download Bookmark Comment

Gianni Industries DK-100 Operation User's Manual

DK-100 Stand Alone Digital Keypad (5 Codes)
I.
Product Characteristic:
Blue back light keypad, easy to recognize in the dark.
ANSI standard size, convenience for mortise installation
Allows up to 99 PIN codes
Epoxy potting, water-proof design
Dual relays operate simultaneously, able to control locks and other access control
system
Cutting spare delay time after door closes for anti-tailgating
LED display with audible indication
EPROM: Non-volatile memory, System will retain all programs and codes after breaks
down power.
Metal die casting housing with special screws
II. Specifications:
Operating Voltage DC 12~24V
Current Draw Average 35mA, Peak 130mA @ 12Vdc
Keyboard 12 keys, (0~9, *, #)
Relay Activation Time
Relays Rated 2A MAX @30Vdc ;0.4A @ 120Vac
User codes capacity 99 slots (*001~*099)
Operating Temperature -20~+70℃
Ambient Humidity 5~95% relative humidity non-condensing
Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-DK100 Ver.B Published on 2007.09.12
Operation User's Manual
LED Red/ Yellow/Green
Input request-to-exit & door status contacts
Output Dual relays, N.O./N.C./Com. Output (free voltage contact)
Dual relays operate simultaneously (*100)
Strike Time: 1~99 seconds(adjustable)
Strike mode: Pulse (1~99 Sec.) or Latch (0 sec.)
Page: 1/ 3

   Summary of Contents for Gianni Industries DK-100

  • Page 1

    Strike mode: Pulse (1~99 Sec.) or Latch (0 sec.) Relays Rated 2A MAX @30Vdc ;0.4A @ 120Vac User codes capacity 99 slots (*001~*099) Operating Temperature -20~+70℃ Ambient Humidity 5~95% relative humidity non-condensing Copyright © Gianni Industries, Inc. All Rights Reserved. P-MU-DK100 Ver.B Published on 2007.09.12 Page: 1/ 3...

  • Page 2

    3 seconds, the remaining 7 seconds will be ignored and door locks automatically once the door closes. V. Operation Instruction: Copyright © Gianni Industries, Inc. All Rights Reserved. P-MU-DK100 Ver.B Published on 2007.09.12 Page: 2/ 3...

  • Page 3

    (5 beeps) reset successfully Insert the jumper to 2-3 positions to back to normal operation mode. Remarks: The occupied PIN codes can’t be the master codes. Copyright © Gianni Industries, Inc. All Rights Reserved. P-MU-DK100 Ver.B Published on 2007.09.12 Page: 3/ 3...

Comments to this Manuals

Symbols: 0
Latest comments: