INNOSTREAM INNO 90 User Manual page 9

Gprs tri-band camera phone series
Table of Contents

Advertisement

The digital time is displayed at the right bottom place in this area. If Clock Display menu is set to Off,
the digital time is not displayed.
Note :
The broadcast message service may not be available on all networks.
Function Key Area:
The functions assigned to right soft key and left soft key are displayed.
If you press [VOLUME-DOWN], current date, day and time is displayed at this area for short time.
< Sub Display Screen >
<-- Icon Area
<-- Network Status or Event Area
<-- Time Area
The background image is displayed according to the setting of Wallpaper menu. Please see Section 9
for details. You can set the background image from the Sample Image, Photo Album, Image File,
Mflash or Video.
Icon Area:
5 soft icons such as Signal Level, GPRS, Vibrator, Alarm, and Battery Level are displayed indicating the
phone status.
If the quick silence mode is enabled,
icon will appear in the Vibrator icon's place.
If there is an active GPRS connection,
icon will appear in the GPRS icon's place.
If Traver Charger is inserted, the Battery icon will be scrolled.
Network Status or Event Area:
Network name registered is displayed. If Network Name Display menu is set to Off, the network name
is not displayed even though your phone is registered to any GSM or GPRS network.
If there is not any GSM or GPRS network near the location you are, No Service is displayed.
If you are in the coverage of a GSM or GPRS network but you are not allowed to be registered to the
network, Emergency Only is displayed.
If an event is occurred, an adequate event image is displayed. For more details, please see Section 1.1.
If you press [VOLUME-DOWN] on the idle screen, current date and day is displayed on the area for
short time.
Time Area:
Current time is displayed in this area.
1 7
2. Getting Started
Note :
Please never detach the battery from your mobile while your phone is alive. To turn off your
phone, please press and hold down only
Please use only approved batteries and chargers.
2.1 How to attach the battery
1. Align the bottom of the battery down into the holes in the bottom of the phone.
2. Then sit the battery on the back of the aligned until it clicks into place.
2.2 How to remove the battery
Turn off your phone first.
1. Press up the battery release latch
2. Slightly lift the upper place of battery out of back of phone.
until you see the power-off animation.
2. Getting Started
1 8

Advertisement

Table of Contents
loading

Table of Contents