INNOSTREAM INNO 90 User Manual page 56

Gprs tri-band camera phone series
Table of Contents

Advertisement

11.Data and Fax
You can transfer data or fax to other devices via a data cable that is connected to PC. The data
cable is used to connect your phone to the PC's serial port.
To send and receive E-mail and faxes, connect to computer and access the Internet, you need the
appropriate data/fax communication software installed on your computer.
Also, you have to subscribe the data service when you subscribe a network service provider.
This service varies depending on the network, so contact service provider before you start using the
service.
Note :
The data cable is optional part, so you need to purchase that from your phone dealer in order
to enjoy the data/fax world.
Modem configuration setting on the PC
Your phone has an integral modem. You need to install a standard modem in your PC's operating system.
- Standard modem with 19200 bit/s (115200 initialisation speed)
- Fax Class 1 modem, max 9600 bit/s
For using fax service, you need to check the fax application program on the PC as below.
- Modem initialisation: AT+IFC=1,1
- Flow Control : Software Flow Control
- 19200 initialization speed and Fax Class 1 modem
How to use the data service.
1. Connect the data cable between the PC's serial port and your phone's external socket.
2. Execute a dial-up Modem software on the PC.
You need to set the Modem configuration on the PC before you use.
3. Execute appropriate data/fax program such as Internet browser on the PC.
Note :
Some data service provider releases a integrated data/fax software including the dial-up
modem software.
1 1 1
Using the travel adapter during the data service
The data cable has a socket for the travel adapter. You can charge your phone while you are enjoying
the data/fax world.
To do it, connect the plug of the travel adaptor to the socket of the data cable as following illustration.
INNO 90 User s Manual
1 1 2
11.Data and Fax

Advertisement

Table of Contents
loading

Table of Contents