Table of Contents
Advertisement
9.The Menu Functions
9.8.4 Push Messages
You can receive push messages sent by your service provider. The push message is a kind of
notification from network, for example, stock news, weather news, headline news or E-mail.
If a push message has arrived, your phone displays New PUSH Message in the idle screen and
sets
icon to inform you of the arrival. If you select [View soft key], you can view the received push
messages on the list.
The small icon on the far right side of each list indicates following meanings.
: indicates that you have not accessed Internet site related to the PUSH message of the list.
: indicates that you have accessed Internet site related to the PUSH message of the list.
If you select [Option soft key], following options are available.
Info : Allows you to view the received push message.
If you press [Select soft key] in the viewer, you can connect to Internet to view more
information.
Load : Allows you to go to the site linked with the received push message.
Delete : Allows you to delete the received push message
Delete All : Allows you to delete all of the received push messages.
9.8.5 Settings
<Connection Profile>
A WAP profile consists of a group of network settings. After setting them up, you simply switch
between the different WAP profiles, without having to re-enter the settings every time you want to
change your network connection.
At first, select a profile you want to set up. And then you will be asked if you want to activate, edit,
rename or delete the profile with options.
- Activate
This option activates the chosen setting as a current WAP setting to be used for the WAP connection.
- Edit
This option edits the WAP setting values to connect to Internet.
Note :
The setting value varies according to the WAP service provider. So please contact your
network service provider for the values before using WAP services.
If you select Edit , the following options are available.
Homepage : Enter the address of the WAP page that you want to use as your home page for
the WAP profile.
Connection Type : Select type of internet connection.
Temporary is a non-confirmed (connectionless) service.
Continuous is a confirmed delivery mechanism but generates more network traffic.
1 0 3
Connection Options : The options are None or Secure and depend on the gateway you are
using.
Bearer : You must select the bearer service provided by your WAP gateway which will be either
GSM Data or GPRS.
You will see different menu items as bearer to which you selected.
You will see different menuu items as bearer to which you selected.
1. Data Service Settings include:
The service settings below are only available when GSM Data has been selected as a
bearer service.
IP Address
You must enter the IP address of the WAP gateway you want to use to access WAP pages.
Dial Number
You need to enter the telephone number to dial to access your WAP gateway.
Data Call Type
You need to select the type of data call to make, that is: Analogue or ISDN (digital).
Data Call Speed
This is the speed of your data connection and should be provided by your network.
Server Login
This is your user identity (Username and Password) for your dial-up server
Timeout
You need to select one of three timeout periods, after which browser will report a failure to
send a data (for example, because the WAP gateway is not responding)
Note :
You need a subscription that supports data transmission.
INNO 90 User s Manual
1 0 4
9.The Menu Functions
Advertisement
Table of Contents
