INNOSTREAM INNO 90 User Manual page 17

5. In-Call Options
4. To add a new participant to the conference call, repeat step 2 and step 3 as required.
You can add incoming callers into conference call by answering the call and pressing [Option soft key],
followed by the Join All option.
Available Options
Please proceed as following sequence to use appropriate option on conference call state.
1. At first, focus on the participant who you want by scrolling through the participants with using
2. Press [Option soft key].
The following options relevant to conference call are available.
Hold All : puts the conference call (all active calls) on hold.
Private : makes a private call with the focused participant (whose details is currently displayed on-screen)
of the conference call, then puts the other participants on hold automatically.
Join All : joins all held calls to the conference call.
Transfer : allows you to make two participants connect, then drop your call from the conversation. Two
participants are connected to each other.
It can be available when one participant is on hold and the other participant is active, or when
one participant is on hold and you are making the other call.
End Active Call : makes all active calls end and keep the held call.
Note : is used for dropping the focused call.
If you close the folder, the conference call is ended
3 3
or
INNO 90 User s Manual